Cisco AIR-CAP2602I-A-K9Â Specs
| 802.11n | Version 2.0 (and Related) Capabilities 3 x 4 Multiple-Input Multiple-Output (MIMO) with two spatial streams Maximal Ratio Combining (MRC) 802.11n and 802.11a/g beamforming 20 and 40 MHz channels PHY data rates up to 450 Mb/s (40 MHz with 5 GHz) Packet Aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit (A-MSDU) (Tx/Rx) 802.11 Dynamic Frequency Selection (DFS) (Bin 5) Cyclic Shift Diversity (CSD) support |
| Frequency Band and 20 MHz Operating Channels | A Regulatory Domain: 2.412 to 2.462 GHz, 11 channels 5.180 to 5.320 GHz, 8 channels 5.500 to 5.700 GHz, 8 channels (excludes 5.600 to 5.640 GHz) 5.745 to 5.825 GHz, 5 channels |
| Max Transmit Power | 2.4 GHz: 802.11b/802.11g/802.11n (HT20) 22 dBm (3 antennas)5 GHz: 802.11a/802.11n (HT20)/802.11n (HT40) 23 dBm: 4 antennas |
| Available Total Transmit Power Settings | 2.4 GHz 22 dBm (160 mW) 19 dBm (80 mW) 16 dBm (40 mW) 13 dBm (20 mW) 10 dBm (10 mW) 7 dBm (5 mW) 4 dBm (2.5 mW)5 GHz 23 dBm (200 mW) 20 dBm (100 mW) 17 dBm (50 mW) 14 dBm (25 mW) 11 dBm (12.5 mW) 8 dBm (6.25 mW) 5 dBm (3.13 mW) |
| Integrated Antenna | 2.4 GHz, gain 4.0 dBi, horizontal beamwidth 360° 5 GHz, gain 4.0 dBi, horizontal beamwidth 360° |
| External Antennas | Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) Cisco offers 802.11n antennas delivering optimal coverage for a variety of deployment scenarios (sold separately) |
| Interfaces | 10/100/1000BASE-T autosensing (RJ-45) Management console port (RJ-45) |
| System Memory | 256 MB DRAM 32 MB flash |
| Power Requirements | Input: AP2600: 44 to 57 VDC Power Supply and Power Injector: 100 to 240 VAC, 50 to 60 Hz |
| Powering Options | 802.3af Ethernet switch Cisco AP2600 power injectors (AIR-PWRINJ4 =) Cisco AP2600 local power supply (AIR-PWR-B=) |
| Power Draw | AP2600: 12.95 W |
| Software | Cisco Unified Wireless Network Software Release 7.2.110 or later |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Temperature | Operating: 32 to 104°F (0 to 40°C) Storage: -22 to 158°F (-30 to 70°C) |
| Humidity | Operating: 10 to 90% (non-condensing) |
| Altitude Test | Operating: 77°F (25°C), 15,000′ (4,572 m) Storage: 104°F (40°C), 9,843′ (3,000 m) |
| Compliance | Safety:Â UL 60950-1 CAN/CSA-C22.2 No. 60950-1 UL 2043 IEC 60950-1 EN 60950-1 Radio Approvals: FCC Part 15.247, 15.407 RSS-210 (Canada) EN 300.328, EN 301.893 (Europe) ARIB-STD 66 (Japan) ARIB-STD T71 (Japan) AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B) FCC Part 15.107 and 15.109 ICES-003 (Canada) VCCI (Japan) EN 301.489-1 and -17 (Europe) EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC IEEE Standard: IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d Security: 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA 802.1X Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP) EAP Types: Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) Protected EAP (PEAP) v0 or EAP-MSCHAPv2 Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST) PEAPv1 or AP-Generic Token Card (GTC) EAP-Subscriber Identity Module (SIM)Â Multimedia Wi-Fi Multimedia (WMM) Others FCC Bulletin OET-65C RSS-102 |
| Dimensions (L x W x H) | 8.7 x 8.7 x 2.1″ (22.1 x 22.1 x 5.4 cm) (without mounting bracket) |
| Weight | 2.3 lb (1.0 kg) |
Reviews
There are no reviews yet.